Site Map

Pages

Products

CS-201-2017 Low AMP Machine

CS-201-2017 Low AMP Machine In 2017 Nebraska Blades released an updated machine with ne w modification to our classic CS-101-2000 machines that we believe you will find incredibly beneficial. These improvements are intended to improve efficiency...
The Ultimate

The Ultimate

The Ultimate Clipper Sharpening Machine is bigger and works twice as hard as the CS-101-2000, and is designed for the well-established professional. Single speed capacitor-start, capacitor-run motor, totally enclosed fan-cooled, Hp 1/2, rpm 1140,voltage...

CS-101-2000 Blade Sharpener (Big Red)

The CS-101-2000 Professional Clipper Blade Sharpener takes the guess work out of sharpening hollow ground blades. With this time tested and proven machine, you will be able to sharpen 15 to 20 sets per hour. At $6 per set, you can create a great part...
CS-10 Professional Clipper (Little Red)

CS-10 Professional Clipper (Little Red)

The CS-10 (Little Red) is the perfect machine for the mobile sharpening professional. It is constructed with 14-gauge steel housing, a single speed fan cooled thermally protected 115V 2.4 amp motor. This machine comes with a 10" Micro-Serrated double-sided...
Cast Plate (16" or 21")

Cast Plate (16" or 21")

We offer Cast Plates in 16" or 21". All plates are double-sided and are available hallow or flat. Our 16" plate will fit the Huff machine, patterned after the CS-101-2000 (Big Red). The 21" Cast Plate will ONLY fit the Ultimate machine.  
Aluminum Plate (10" or 14")

Aluminum Plate (10" or 14")

The micro-serrated aluminum plates come in sizes of 10" or 14". Our 14" plate will fit the Huff machine, patterened after the CS-101-2000 (Big Red). All plates are double-sided and available hollow or flat. Now we offer our 10" plate with flat on ...

Clutch Plate

This tool brings the plate up to speed, while taking the stress off of a generator or inverter. Compatible with the CS-101-200, Ultimate or Extreme Machines. Must be used in          conjunction with an electric or battery powered high speed drill (n...

Dome

Keep dust in its place! Snap on the dome to cover sides and top of the machine. Can be used with or without vacuum system. There are two different sizes for the CS-101-2000 and the Ultimate. Not available for the CS-10.   CS-101-2000 Dome:...
Duo Sharp Ceramic Sharpener

Duo Sharp Ceramic Sharpener

Duo Sharp Bench stone is engineered precision flat, with two interrupted diamond sharpening surfaces guaranteed to provide consistent, even sharpening every time. Includes a non-skid mat. (Base sold separately). 10"x4"x0375"  
Stone Base (for Ceramic Sharpener)

Stone Base (for Ceramic Sharpener)

Ceramic Stone Base prvides 2" knuckle clearance, ruber feet to secure the base and a convenient handle on the underside.
Demagnetizer

Demagnetizer

Thermally protected against burnouts. Effectively removes magnetized metal particles from clipper blades.
Rub Testing Block

Rub Testing Block

Use to quickly find out if you have a true hollow grind. The rub block eliminates the guess works. Method used by Oster and Andis Factories.

Tru Hone Knife

One minute knife sharpening grinds both bevels simultaneously. Easily adjusts to different bevel settings. Fifty percent longer knife life. Variable speed control. Completely eliminates a burr edge. Made of stainless steel construction.

Ookami Gold

Includes the Twice As Sharp (PRO 98) and the upgrade kit to sharpening low and convexing shears.
Twice As Sharp Scissors Sharpener

Twice As Sharp Scissors Sharpener

Scissor sharpening machine that sharpens fabric, industrial and grooming shears quickly and easily. Comes with training video and manual.

Ookami Accessories Upgrade

Ookami Gold Accessories Upgrade for the Twice As Sharp to sharpening high-end convex shears (Twice As Sharp not included).

The Hira-To Flat Hone

Flat hone for sharpening convexing shears.

The Scimech Flat Hone

Flat hone for sharpening convexing shears. Convexing clamp that can sharpen both left handed shears and right handed shears with almost no adjustment to your equipment. Rotate through the entire face of the blade for a correct convexing and precise ...

Clipper Blade Sharpening Download or DVD

Clipper Blade Sharpening DVD (117 Minutes) featuring the CS-101-2000.  Features Bob sharpening with all types of clipper blades on the CS-10, CS-101-2000 and the Ultimate! Copyright 2009. All rights reserved. DVD is for viewing and may not be reproduced. An...

Clipper Repair Download or DVD

Clipper  Repair DVD (107 Minutes) featuring Bob as the Instructor, features the Oyster, the Andis and the Clipmaster blades. Copyright 2009. All rights reserved. DVD is for viewing and may not be reproduced. Any other use requires written permission. Digital fo...
Clipper Blade Sharpening DVD & Clipper  Repair Download or DVD Combo

Clipper Blade Sharpening DVD & Clipper Repair Download or DVD Combo

Clipper Blade Sharpening DVD 3rd Edition Widescreen (117 Minutes) and Clipper Blade Repair DVD Widescreen (107 Minutes) Combo pack. Copyright 2009. All rights reserved. DVD is for viewing and may not be reproduced. Any other use requires written permission. Digital f...

Scissor Sharpening Download or DVD

Scissor Sharpening DVD (69 Minutes).  Features Bob using the Twice As Sharp Pro 98 machine. Copyright 2009. All rights reserved. DVD is for viewing and may not be reproduced. Any other use requires written permission. Digital format is approximately 8...

Knife Sharpening Download or DVD

Knife Sharpening DVD (50 Minutes).   Features Bob using the Tru Hone Knife sharpener. Copyright 2009. All rights reserved. DVD is for viewing and may not be reproduced. Any other use requires written permission. Digital format is approximately 630MB....

Advanced Knife Sharpening Download or DVD

Advanced Knife Sharpening DVD.   Features Bob using the Tru Hone system to learn tips and methods to expand your sharpening skills. 55 Minutes. Copyright 2009. All rights reserved. DVD is for viewing and may not be reproduced. Any other use requires wr...
Knife Sharpening Download or DVD Combo

Knife Sharpening Download or DVD Combo

Knife Sharpening DVD (50 Minutes) and Advanced Knife Sharpening DVD ( 55 Minutes) Combo features Bob using the Tru Hone system to learn tips and methods to expand your sharpening skills. Copyright 2009. All rights reserved. DVD is for viewing and ma...
Degreaser

Degreaser

Blade cleaner that dissolves a broad range of petroleum products plus animal and organic oils and greases.  Cleaner is biodegradable, non-toxic, non-flammable and non-corrosive and has no irritating fumes. Concentrate mixes 1-to-5 with water. Dissolves ...

H-42 Cleaner

Blade wash or plate cleaner.  Use to clean honing plate or as a blade wash. Safe and easy to use, pleasant odor. (8 oz bottle comes with CS-101-2000)
Spray Adhesive

Spray Adhesive

Adheres the grit to the plate. It is a mixture of Lard Oil and H-42.  Abrasive adhesive.  Use sparingly, a little goes a long way! (8 oz. comes with CS-101)
Lard Oil

Lard Oil

Lard Oil is straight lard that is a thicker solution for the grit to adhere to the plate when sharpening.
H-42 Oil

H-42 Oil

Used for oiling clipper blades.  Premium oil formulated for commercial use. Superior lubrication.  
Start up oil

Start up oil

Use after sharpening, cleaning and reassembling blades. Has a drying agent. Displayed in photo is 2 oz needle nose bottle.
Honing Powder

Honing Powder

Honing powder sold per pound.  We carry several weights to fit all your sharpening needs. #180 is the coarstest grit, typically used for rusty clipper blades of any size. #220 and #240 are used for the every day sharpening. #280 is works well with t...

Test Fur

Our choice for testing every blade before it leaves our shop. An economical way to assure quality.

Test String

Test string to test larger blades.
Power Magnet

Power Magnet

The power magnet comes in two different sizes. The power magnet is used to hold the clipper blades when sharpening. The large power magnet can be used when sharpening larger clipper blades.
Blade Counter

Blade Counter

Blade counter keeps track of the number of blades sharpened. Includes re-set knob, four holes on base for a rigid mounting and a spring lever for attaching to the machine.
Deluxe Socket  Setter

Deluxe Socket Setter

A double ended tool, great for setting sockets horizontally. Five inches in length by half an inch thick. Quick and accurate.
Wolff STAT Tool

Wolff STAT Tool

Clipper Blade tension adjusters Wolff STAT Tool Tutorial
Blade Scale

Blade Scale

Blade Scale quickly and easily measures clipper blade tension in pounds.   How to Adjust Clipper Blade Tension

Tension Set Pliers

This handy tool is very versatile in clipper blade sharpening. I just recently came across this tool, and it has changed my process of adjusting the tension of the spring. Who says you can't teach an old dog new tricks. This tool comes with red markings...

Plastic Bags

Plastic bags for packing sharpened blades.